GP Air mover / Carpet dryer creates continuous, high velocity airflow for fast, efficient drying of carpets, pads, floors and walls, helping to eliminate mildew, bacteria growth and other odors.Also, great for powerful, durable and lightweight. it is equipped with a thermally protected motor with safety circuit breaker, and a water resistant cord. The blower also features a balanced carry handle for easy portability, and is stackable for convenient storage.
Features of GAM03 Air mover and carpet dryer
●one speeds
●4 angle operatingpositions to suit all drying requirements
●Large air outlet, outlet area more than 0.31FT2
●Stackable for easy storage
●High powered motor with built-in thermal overload protection.
●Low operational noise with low frictionless bearings.
●Constructed of durable polyethylene - won't dent or corrode
●Ergonomically designed carrying handle and for mains cable wrap, keeping it neat and tidy during storage.
Specifications of GAM03 Air mover / carpet dryer
| Model | Power (hp) | V/Freq. (V/Hz) | Airflow (CFM) | Speed (RPM) | |||||
| H | M | L | H | M | L | ||||
| GAM03-1/12 | 1/12hp | 115/60 | / | 520 | / | / | 1060 | / | |
| GAM03-1/12 | 1/12hp | 230/50 | / | 470 | / | / | 910 | / | |
| Adjustable Angle of airflow(o) | Current (A) | Blade/Wheel | N.W (kg) | Packing (cm) | ||
| H | M | L | ||||
| 0/15/45/90 | / | 2.5 | / | Plastic | 5 | 35x30x40 |
| 0/15/45/90 | / | 1.2 | / | Plastic | 5 | 35x30x40 |
Applications ofGAM03 Air mover and carpet dryer
Our carpet dryer and air mover are widely used for carpet drying, marbie floor drying, wood floor drying and inflatable models,etc.
Operating Instructions For Our Air Movers and carpet dryer
1. Check the machine for any obstructions in the fan or airflow areas before plugging in the unit or operation of the unit.
2. Set the machine in the desired orientation for operation.
3. Plug the power cord into a grounded outlet. Do not use an extension cord.
4. Check GFCI protection by pushing "TEST" button. If operating properly, "RESET" button will pop out.
5. Do not plug more than 11 amps total into the GFCI outlet.
6. Ensure the switch is in the center OFF O position.
7. The machine has two power settings, Low | and High ||. Always start in the HIGH position, then to LOW if desired.
8. When daisy-chaining, turn one unit on at a time to prevent excessive current inrush from starting multiple units at one time.
9. Every month, press the "TEST" button to verify that it cuts-off power to the GFCI. To restore power, press RESET. If the red LED begins to flash, the receptacle has lost GFCI protection and should be replaced immediately.
Related and customed air mover and carpet dryer
2. Set the machine in the desired orientation for operation.
3. Plug the power cord into a grounded outlet. Do not use an extension cord.
4. Check GFCI protection by pushing "TEST" button. If operating properly, "RESET" button will pop out.
5. Do not plug more than 11 amps total into the GFCI outlet.
6. Ensure the switch is in the center OFF O position.
7. The machine has two power settings, Low | and High ||. Always start in the HIGH position, then to LOW if desired.
8. When daisy-chaining, turn one unit on at a time to prevent excessive current inrush from starting multiple units at one time.
9. Every month, press the "TEST" button to verify that it cuts-off power to the GFCI. To restore power, press RESET. If the red LED begins to flash, the receptacle has lost GFCI protection and should be replaced immediately.
Related and customed air mover and carpet dryer
Air Mover, Carpet Dryer, Floor Dryer, Turbo blower, floor blower, carpet blower, air dryer, air dancer blowr, infatable blower, plastic portable blower, Pet dryers forfor the water damage contractors and flood restoration professionals.
