furniture powder coating gun ,manual powder coating machine,used for manual powder coating,for spraying metallic products.
Advantage
0-100 Digital Adjustable KV
Fully Adjustable Amperage
PGC1 Control Unit with PG1 powder coating gun
Fully Adjustable Air for Pump on Pressure, Dosage and Nozzle Rinsing Air.
Comes with Full Array of Nozzle Assortment.
Field Tested and Proven to operate in the toughest environments.
Comes with different array of delivery systems:
Hope Feed - 45L
this system is specially balanced for the maximum spray capability with
the Smoothest Finish Possible
Control unit picture :.
Back side of PCG1 powder coating machine 
Mactched with PG1 manual powder gun 
Manual coating equipment Function description
the powder gun through the powder hose . The powder is electrostatically
charged at the nozzle of the gun. In addition, an electrostatic field is
created between the gun nozzle and the grounded object. The charged
powder spray remains adhered to the surface of the object.
The powder is fluidized by air forced through a porous plastic plate from
below. The powder acquires, thereby, fluid-like characteristics.
The conveying air, supplementary air, and rinsing air are set on the control
Unit
| Electrical data | ||
| Mains input voltage | 100-240 VAC | |
| Operating frequency | 50-60 Hz | |
| Input power | 50W | |
| Nominal output voltage (to the gun) | max. 12 V | |
| Nominal output current (to the gun) | max. 1 A | |
| IP54 | ||
| Ambient temperature range | 0°C - +40°C (+32°F - +104°F) | |
| Max. operating temperature | 85°C (+185°F) | |
| Approvals | CE | |
| Pneumatical data | ||
| Compressed air connection | 1/4" male quick release | |
| Max. input pressure | 10 bar / 145 psi | |
| Min. input pressure (while unit in operation) | 6 bar / 87 psi | |
| Max. water vapor content of the compressed | air 1.3 g/m³ | |
| Max. oil vapor content of the compressed air | 0.1 mg/m³ | |
| Packing Dimensions | ||
| Length | 120CM | |
| Width | 79CM | |
| Height | 73CM | |
| Weight | approx. 55kgs | |
| Connection Description | ||
| 1.1 Air In | Compressed air connection (6-10 bar / 87-145 PSI) | |
| 2.1 Power | Mains cable connection (100-240 VAC) | |
| 2.2 Gun | Gun cable connection | |
| 1.4 |
| |
| 1.3 | Pict
| |
| 1.2 | Pict
| |
| Grounding connection | Pict |
Include
A control unit power supply cable
- A air filter
- A air pressure regulator
- A fluidized powder hopper
- A plug-in injector
- An manual powder gun with gun cable, powder
hose, rinsing air hose and standard nozzle set.
- Pneumatic hoses for conveying air (red), supplementary
air (black) and fluidizing air (black)
powder hose
Ground wire
