Horizontal type pump motor stator automatic coils forming machine
This type middle forming machine adopts a horizontal structure, suitable for big power,big dimension, heavy weight, long stack length stators. The stator should be loaded and unloaded manually directly. The series opens the stator bore and as an option pushes back the wedges and preforms the winding head. With a touch screen in control, this forming machine is of high automation. And all stator forming parameter can be set in the touch.
Application
It is applied to deep water pump motor and other various type of big dimension stator.
Main technical data
| Stator OD | ≤300mm |
| Stator ID | ≤200mm |
| Stack Height | ≤400mm |
| Height of Coil | ≤70mm |
| Pitch time | ≤30s/pc |
| Displacement of Cylinder | 50L/min |
| Power supply | 380V 50/60Hz 4Kw |
| Weight | ≈2500Kg |
| Dimension | (L)4400×(W)1850×(H)1350mm |
Information needed for forming machine inquiry
It will be better if customer could send us detailed drawing including below information.
1. Stator lamination drawing
2. Stator stack drawing
3. Stato winding drawing
4.Required productivity
5. Other technical requirement
If possible, it will be better if customer can send us samples.
Appropriate use
If coil dimension and appearance is inaccurate, stop to do adjustment to avoid of quality accident.
Check and clean up the electrical cabinet once every three months.
The machine should be stopped or power should be off when the operator is away or do clean and lubricating job.
Do not remove the safety protection device in the process of using.
The dress of operator should meet the safety requirements, stand in proper position.
Regularly clean the lubricating tooling and lubricating system. Do not keep the safety door and oil eye lid to avoid of that foreign matter like dust,metal scrap get in.
Do not operate machine during its maintenance, stop running machine and cut off the power.
That other than specified personnel do not operate the machine, and two people operate the machine at the same time is forbidden.
It is prohibited that operate machine and touch the electrical parts by wet hands, probably may cause electric shock.
The operator can not leave away when the machine is running, should keep his eyes on that if any abnormality (abnormal noise, unusual smell, over heat, vibration) of each parts coming up. Stop and check the machine immediately if any of above mentioned takes place, and solve it in time.
It is prohibited that to use the machine beyond its capacity and load.
After stop using the machine, please do the check an clean up, please do not use the steam or water or corrosive liquid to clean the machine.
The height of the hydraulic oil in the oil tank should keep in same level with the mark line; the hydraulic oil no is J-HM46# antiwar hydraulic oil.
Machine inner part
